The Radavist

In the world of high-end, performance mountain bikes, Santa Cruz wears a crown. Maybe not as a ruler of all, but most certainly the world of the 29’r. When the Tallboy was first released, it was widely praised as the first 29’r that actually exceeded expectations.

I’m not a jealous person, but I must say, Lyle’s Tallboy LTC is one balleur bicycle. With a component list like Chris King, SRAM XX1, Rock Shox 150mm Pike and even that stubby Thomson MTB stem, this bike has seen it all. Well, as far as the Trans-Provence, Swiss Alps, Chamonix and riding in Åre, Sweden for the whole summer shooting the Acre line is concerned. The dude and this bike are living the dream.

After quite a few emails, requesting detail shots of this bike, I took a few minutes to shoot some photos prior to our ride in Glarus… Check out more in the Gallery!

It’s been a long two years for Ben from Argonaut Cycles but if he’s learned anything along the way it’s this: hard work and dedication pay off. In a lot of ways, the Argonaut Cycles road bike embodies the height of carbon fiber manufacturing. While this bike in particular might look like others that have been on the site, countless, minute changes have gone into making it unique. The design process and the final product are always improving.

Manufacturing in the USA allows Ben to tweak the layup process and continuously offer his clients the best carbon fiber road frame. Ben’s a good friend and personally, I’m very partial to Argonaut, so I took this bike out of the Eurobike tradeshow to photograph it. See more in the Gallery!

Guten tag! I have found the internet…

It’s Eurobike and I have no idea what to do here. Well, that’s not true, I have a few clever posts up my sleeve. After 12 hours of madness, I’ve made my way through most of the show, ran into some people, saw some cool shit, exhausted my shutter finger and the first flask filling #FFF. I managed to get some great shots, including the new White Industries anodized hubs, the return of turquoise Chris King, some rad Tune products, a sexy LOOK, Bear Grease, #Partybrand, body-painting, AWOL, beer, beer and beer.

While I’m working on more content, how about some randomness from the first day? I thought so…

When Ian at Icarus moved to Austin, Texas, I don’t think he anticipated working on this many local frames. Or that Chris would put down two deposits at once: a lightweight road bike and a fendered, touring / commuter. This is the first out of the queue, a modern, steel road bike with a matte paintjob and a few clean details. Nothing extravagant, but also nothing simple.

Chris is a father and he works full time, so riding is always a last minute, unplanned endeavor. He was looking for a little inspiration to sneak in an hour or two when he could and Ian built him just that. With a Zipp cockpit, seatpost, Chris King R45 to HED Belgium, Fizik Kurve saddle, Campy Chorus 11 speed and King Cage bottle cages, it’s up there in the “dream bike” category…

San Francisco is out of control and not in a good way. Bike theft is at an all time high as the city continues to cope with a massive drug problem. Basically, your bike’s not safe unless it’s under your ass, being pedaled. Natalia had her race bag, shoes and this Igleheart singlespeed MTB “secured” within her car as it was parked in Noe Valley. Within minutes, her windows were smashed out and her bike was gone.

The next morning, Rai from Mission Workshop was riding past the BART station on 16th when he spotted it being pedaled by some random dude. He put out a call and had some friends go steal it back from some unsuspecting schmo who had bought it from the crackhead that stole it.

Now it’s safe and sound in Natalia’s possession, who races it for Chica Sexy in the Bay Area mountain bike circuits. It’s not everyday you see some Boston-area steel in SF, so I had to get some photos of it…

In a lot of ways, my first Geekhouse Woodville touring bike served as a catalyst for me taking cycling more seriously. It was my first custom bike and provided me with ample motivation to just get out there and ride. The first major tour being Portland to SF and from there, I took it on numerous other trips here in Austin. When it was stolen last year, I began planning out a replacement with Geekhouse. There were some things I wanted to change, but mostly I just missed having a touring bike to ride around on.

As it sat en queue, I couldn’t decide on how I wanted it to function. Initially, I wanted a dirt-drop 29’r pack-bike tourer for riding the MTB trails here in town, but then my Independent Fabrication took over that role, so I revisited what I loved the most about my first touring bike. The riding position is what I would consider traditional but having acquired the Bruce Gordon Rock n Road tires, I wanted to make sure it would roll at least a 50c. I also opted for external cable routing and passed on the S&S couplers.

I’ve had great luck with the SRAM XO rear derailleur and its 11-36 range matched with a compact crank. This time I went with White Industries VBC system and a Force front derailleur, converted to a top-pull. With a 50 outer ring and 32, inner, I’ll have a wider range than I would with a triple. Chris King classic hub on the rear and a SON hub with matching Edelux lamp on the front for light.

Paul components throughout: Tall and Handsome post, Touring Cantis. Other components include a Thomson seat post collar, Brooks Swift saddle, Salsa Cowbell 2 with SRAM barcons, TRP levers and MKS Lambda pedals. With all the Made in the USA bling, I got Marty and Brad at Geekhouse to fabricate a one-off custom stem as well as front and rear racks. The beauty of the front racks lie in their low-rider detachable hangers on the front…

I always load front and low on trips. The bike rides a lot better since the handling isn’t compromised as it would with a rear load and these low-riders are low. My large panniers sit about 6″ off the ground, which is perfect on a 43c tire. On top of just looking amazing, these racks weighed a lot less than the Tubus system I had been using previously. The fork is another highlight: internal cable routing for the Edelux lamp and the segmented shoulders have rack attachments.

Even with all those details and that component list, a build can still go south with a bad powder job. Brad really knocked this one out of the park. Olive Drab green with a matte clear adds to the utilitarian / military aesthetic I wanted. I’ve been scooting around town a lot on this beaut and took it on a few trail rides last week and am in love. Even the ride out to shoot these photos was super dreamy…

I still need to dial it in though. The derailleur cables are now routed under the tape, mostly to make it easier to mount a Swift Industries Ozette randonneur bag. I’ll also need to splice some more chain so I can use the 50t with more of the cassette but for now, it’s riding really well.

That said, it’s not a touring bike until you’ve at least camped on it and summertime in Texas will provide ample opportunities. Right now, I’m just pumped that it came together so well. Many thanks to PAUL, Bens Cycle, Chris at Mellow Johnny’s and the Geekhouse crew for making yet another dream come true.

… also, buy renter’s insurance! Most plans will cover your bikes when they’re stolen!

My Icarus Viking MAX track bike was incapacitated for a few months while the fork sat en queue at Fresh Frame. After a lot of surface rust started to form around the shorelines, I felt it best to just get it painted, if anything, for the longevity of the bike. Since this bike has one of the uber-rare Chris King stainless steel headsets, I got Bryan Myers from Fresh Frame to polish the stainless crown to match and he even added a little bit of wood inlay in the lug window. I have to admit, I wasn’t completely stoked on the wood inlay but It’s growing on me.

This bike has proven to be one of my favorites in the stable and why wouldn’t it be? It’s a classic track bike with some very unique detailing…

Ok, brace yourselves here. This bike is absolutely stunning. It’s no secret that Jordan Hufnagel made some Beautiful Bicycles in his days as a frame builder and I feel like in the last few months of his torch time, the bikes he built were so full of class and character. Ty’s cross, his own porteur and Jesse’s “Fire Road Racer”.

When you are from LA, you’re very familiar with the various fire roads and singletrack off-shoots. After spending time on his road bike, carefully descending down these rutted and rocky descents, Jesse decided it was time for a more fitting vehicle… See more in Gallery!

I can really appreciate builds like this: vintage steel with a mix of modern componentry, especially when you add a tubeset like Columbus MS into the equation. This bike rolled into Shifter Bikes while I was in Melbourne and it was one of those bikes that didn’t like to sit still. It kept wanting to roll. Was it the legacy of Greg Lemond that was trying to establish a forward momentum? Who knows… but the Campagnolo Centaur 10, Zipp wheels, Thomson cockpit and Rolls saddle probably have something to do with it.

Any guy will tell you that putting a bike together for his lady can be an emotionally taxing event. Luckily for me, Lauren knew exactly what she wanted when I proposed the idea of buying her a new bike for her birthday. She loved my Icarus and Ian’s work but wanted something practical to commute on here in Austin. I was pushing for a full-on touring bike but she doesn’t like the idea of bigger tires and wanted something zippier.

What we agreed on is a mashup of a few things: primarily a long-reach caliper, lower trail road bike. It’ll fit 28c tires and fenders or 32c without, it has rack mounts on the front and the rear for any sort of light touring or camping we’d do but most importantly, the front cockpit is by no means racey…

She liked the riding position of her Tokyo Fixed Dream Machine build but wanted the bars a little wider and better stopping power than her cantis. After finally wrapping my head around figuring out what she wanted, we met up with Ian of Icarus Frames, who measured her and went through the new frame procedure.

In the meanwhile, I started looking for parts. Rather than going all budget, I splurged a bit and went with a lot of American-manufactured products. Ian was making a stem to accomodate the back sweep of Nitto Albatross bars to which we’d run barcon shifters on. Chris King had these “ox-blood” Sotto Voce headsets at NAHBS, so I picked one up. Then, I consulted my friend PAUL and kinda went all out. Soon, I had purchased Canti Levers, polished Medium Racers, Moon Units, Polished Tall & Handsome seat post, Funky Money cable hanger and it didn’t stop there…

As with any commuter, gearing is a key factor. Lauren had been riding a single speed to work consistently but some of the hills en route to her teaching job were a bit tough. We also want to be able to do longer rides out to the hill country, so I chose the White Industries VBC cranks (46/30) with a mid-cage Shimano 105 rear derailleur and a 12-32 cassette. Shimano 105 hubs to H+Son TB 14s are bomb-proof, budget wheels. Topping the build off are Panaracer Paselas 32c, Brooks B 17 S saddle and tape.

The paint would be from Fresh Frame and the color we chose is an elusive one. Was it blue? Or green? It changes with the light. In the shade, it’s sort of jade but in the sun, it sparkles blue. Whatever it is, the final product is stunning.

While the bike is shown here, sans racks, we’re in the process of tracking down a good front basket and a rear rack for panniers. The bike is light, coming in at just a hair over 19 lbs and it “rides like a dream”. If it were my bike, I would have done a few things differently but that’s the beauty of a custom bike, you get what YOU want and trust me, there are few arguments I’m willing to engage in with this lady. She always gets what SHE wants… who can blame her? Further down the road, I’ll look into new panniers and maybe a porteur bag but for now, I’ve spent enough money on this thing!

Many thanks to Austin Bikes for the build, Bens Cycle for the assistance in the components, Ian Sutton of Icarus Frames and Bryan Myers at Fresh Frame.