The Radavist

Everyone that reads this website has had a moment in their life where cycling became something more than just pedaling around. They found a bike, or had a moment out riding that changed their perspective forever. For me, it was a mountain bike in college. Sure, I had bikes growing up, but they were always used for transportation, or hitting a kicker ramp and some trails once and a while. It wasn’t until college that I found something I vibed with. The trails became an exit from architecture school. I sucked and was slow but loved going fast and mostly avoiding the occasional wreck.

That was over 10 years ago and since moving to Austin, I’ve wanted to get a new MTB but never really had the opportunity arise. I didn’t necessarily want a modern machine and preferred steel. This year at NAHBS, when I walked up to the Independent Fabrication booth, this blue beauty caught my eye. I walked over, checked it out and quickly realized that THIS is what I was looking for. Rigid, modern components, throwback Somerville geometry and an Igleheart fork. It looked like a modern day Fat Chance.

Gary walked up and told me how the Deluxe Redux came about. Last year, when Chris Chance came to NAHBS, he was asked what he thought of modern day MTBs and his reply was something along the lines of “things got really complicated”. The Deluxe Redux is IF’s answer to that. They hired Chris Igleheart, ex employee of Chris Chance to make 20 forks and IF would make the frames. They were each painted either electronic blue, hot lime or lavender.

Decked out with Shimano XT, which uses arguably some of the best hydraulic disc brakes in the industry, Chris King throughout, with Crank Brothers Cobalt bars, stem and post. The Deluxe Redux is topped it off with hand-laced Luxe Wheelworks Stans Tubeless wheels and some Racing Ralphs. It was even Mudfoot blue!

Knowing that I had to have it, Gary and I struck a deal. For me, the parties involved in this bike are so special and so Somerville that it was a worthy MTB choice. Here in central Texas, things can get rocky, fast but since I’m used to pulling lines on the cross bike, I’ve found this bike just eats that shit alive. I have a general rule about posting my bikes: don’t post about them til you’ve had a moment with them and this week, I’ve had a few. Last night when I shot these photos, I had one of the best rides on it yet.

This bike and I have clicked real hard this week. I’ve crashed a few times, finding the pocket on a sharp turn but have been able to pump and thrash through some technical sections with ease. It just jams through my favorite trails. As shown here, it’s all stock, even with the XTR pedals. I wanted to give everything a chance before swapping parts out. In the end, I’ll probably go ENVE cockpick and post. I’m not a fan of the Crank Brothers Cobalt post but the bars and stem are growing on me. I’ll switch to tubeless when I’m back from China as well.

What about suspension options? Well, Igleheart told me it’ll be tricky but possible, only because of the rake. This bike has a trail of 73mm. A rake of 50mm and a heat tube angle of 71 degrees. I could lock out a 100mm Fox at 80mm and achieve roughly the same HTA but I don’t think that’s what this bike deserves. At some point, I’ll go full suspension but right now, this is a great machine for how I’m riding.

If this is something you like, there are still a small and a medium Deluxe Redux for sale at IF for $4,500, which considering the parts alone, is a steal for steel. Contact IF for more information.

Each year, I love watching people’s faces as they enter the Chris King compound and although the metaphor “like a kid in a candy shop” is somewhat dated, it’s application here is quite fitting. I can’t even walk into their booth without picking up at least a headset (purple!). This year at NAHBS, the Portland based frame builders and component manufacturers brought all kinds of eye candy. My favorite project bike was the champagne and purple Sportif Racer but people were tapping the top tubes and squeezing the brakes of the Cross Racer and Overlander (which I totally didn’t get a good photo of).

At this point, you’re probably not even reading the copy anymore, so check out the gallery for more goodness!

In Kyle’s quest to ride American-made bicycles, he came across the late Santa Cruz Stigmata. The frame was very affordable, so he bought one and rode the shit out of it. A few months later, he ended up breaking it (went off a trail, nose-first), but was lucky enough to have Santa Cruz replace it with a new frame.

This bike is everything a race bike should be, it’s light, great components where they count and looks damn nice. His #Jahblessed Chris King headset and vintage Salsa Skewers are great accents and as always, he’s got a super rare Ramblin Roll carrying the essentials.

Since Kyle only races SSCX this became his travel bike. We both agree that a cross bike is the ideal bike to travel with, for various reasons and the Stigmata was a very affordable, made in the USA option. Unfortunately, these frames were eventually discontinued, as production moved entirely overseas.

On his last day here in Austin, I shot some photos of it at his favorite bar in town, the Yellow Jacket Social Club.

I’ve been trying to type out a few introductory sentences for this bike for the past few minutes and honestly, I have no idea where to begin. So let’s start out by me saying that it is by no means the first carbon fiber bike I have been offered but it was the first that had a compelling story attached with it, something I’m always intrigued by and will ultimately make for a better piece of journalism.

For the past year or so, I’ve been watching Ben at Argonaut Cycles reinvent his modus operandi. He made the shift from building steel bikes to developing a new fabrication system with a local carbon manufacturer. Unlike anything else currently being manufactured domestically, or overseas, the new face of Argonaut is focused on the future of bicycle design. But that’s not to say that Argonaut’s steel past had been cast aside.

Before he even began to sketch out his design, he met with the carbon engineers, who reverse-engineered some of his favorite steel tubesets, and improved upon their weaknesses. Ben wanted his bikes to have the same ride characteristics of his steel bikes, just more technologically advanced. He came to loosely call this “steel 2.0” but you should take that with a grain of salt because let’s face it, carbon fiber is not steel.

This bike is however a by-product of domestic engineering and fabrication. The carbon weave is from the States. It’s cut to shape, moulded by a proprietary process, assembled and finished all within an hour drive from Portland. The process used produces very little waste. There’s no hodgepodge assemblage, no messy resin and it’s 100% custom. Basically, it’s a streamlined process that utilizes technologies that allow each frame to be engineered to a customer’s specific needs.

That’s what had me intrigued in Argonaut and so I agreed to come on board. Soon, I started to hear the echos of “steel is real” in the back of my head, however. I knew my Bishop is as perfect as a steel bike could be. The geometry is dialed and I’ve never ridden anything like it. So I approached Ben with the idea to make the exact same bicycle, just with his new carbon manufacturing process.

Dimensions, trail, geometry, were all the same, just the profile changed a bit to a racier silhouette. Even the tube’s proprietary layup were influenced by the same steel that my Bishop is built from. Bottom line is, I wanted to be able to subjectively compare the two materials.

After I filled out my ride journal, had numerous talks with Ben and designed the paint, the bike was done. Last week, I arrived in Portland and immediately got to check it out. First thing I noticed was how much of a stellar job Keith Anderson did on the paint. The build wasn’t bad either! Rotor cranks, SRAM Red group, ENVE tapered fork, ENVE bars, Thomson stem, Fizik Kurve saddle, Chris King hubs to H+Son Archetype rims (built by none other than Sugar Wheel Works), Chris King PF30 ceramic BB and that special I8 Chris King headset. It was a dream build.

But what about the ride? The first day, we did a nice 25 mile ride up Saltzman, then Saturday, we headed out towards Mt. Hood for 75 miles (then Billy broke a spoke and we had to call it quits). My initial reaction is very optimistic. The ride is what I can only call “light and responsive”. It handles like my Bishop but even better. Descents are faster and it climbs with little or no qualms. There’s no jarring feel when I hit rough terrain. Everything feels dampened and smooth.

My previous experiences with carbon rental bikes like Cervelo, Specialized and other brands were always harsh. The bikes were stiff and I didn’t enjoy the ride. I’m not a racer, I don’t need a bike engineered to race. I need a bike that rides how I want it to, when I want it to and that’s what Argonaut produced for me. It really is like steel 2.0… So what about my Bishop? There’s nothing on this planet that would make me stop riding it. That’s a fact. Steel is still, real but this new experience has been loads of fun. As for the bike itself, it’s very easy on the eyes.

The bike weighs 15.5 lbs as seen here (minus bottles). With middle-grade LOOK pedals, 32h wheels and 28c tires, that’s not bad at all.

See more photos in the gallery!

Truth be told, I put a deposit down for a 2012 Geekhouse Team Mudville cross bike before my Woodville touring bike was stolen. While I’m planning on racing here in Austin when there are local events, I’m also just stoked to finally have a cross bike to travel with. Over this past year, I’ve come to determine that a cross bike is an ideal travel bike.

You can do just about everything on them: singletrack, off-roading, gravel, road rides and even light touring. Because this bike will be 60% all that and 40% racing, I built it up initially to respond to riding in Northern California and a brevet I’ll be riding later on this month. Hence the double cages, clinchers and Ramblin’ Roll. In fact, I’m heading to Cali right now to partake in some dirt rides.

Enough of the intent, how about the bike? A few things are new on the 2012 Team Mudville models. For one, the ENVE tapered fork and headtube. It’s so big and yes, it really offers a noticeable difference in handling. The tubing selection is a little different on mine than the other bikes. Columbus Life stays ensure my big ass won’t tweak the rear end riding like an asshole or casing barriers.

I honestly don’t have tubular race wheels, so I’ll be using my trusty Profile Elite road hubs to HED Belgiums. The SRAM Force group, ENVE stem, Thomson Elite post, 3T bars all compliment the brightly anodized Chris King InSet Mango headset and matching bottom bracket. A Paul Components Funky Monkey drops the front cable a bit lower and stopping power is provided by Paul touring cantis. After getting everything dialed in, I can say that I’m really enjoying the ride.

Many thanks to Geekhouse bikes for the stellar frame and Ben’s Cycle for the parts!

Enough copy, check out the photos!

Ty from Golden Saddle Cyclery loves cross. He lives for it. All year he trains and diets strictly for the radness. He even turned vegan to eat healthier. I don’t understand all that but his new Hufnagel cross bike looks like serious business. After Ty rode the 2012 NW Rapha Gentlemen’s Race, I took his bike for some lens love. I didn’t want to bring it back after pedaling over to a spot in the woods for photos…

Click on the above photo to launch the gallery, or here to open in a new tab.